Description
FAST also offers complete bolt-on EZ-EFI 2.0 Fuel + Ignition Multi-Port Electronic Fuel Injection Kits that allow anyone to install a multi-port injection setup on Small and Big Block Chevy and Small Block Ford engines that were originally carbureted. These kits can be used on anything from mild street rods and muscle cars to 1,000 horsepower all-out race cars. EZ-EFI 2.0 Fuel + Ignition Multi-Port Electronic Fuel Injection Kits include carefully matched components, including the EZ-EFI 2.0 Fuel + Ignition , hand-held device, single plane EFI intake manifold, throttle body, Precision-Flow Fuel Injectors, fuel rails, in-tank or inline fuel pump kit, electronic fuel pressure kit, all necessary sensors, clearly labeled wiring harnesses and the distributor.
Resources
Installation Instructions
Resources
Installation Instructions
Specifications:
| Able to Control Boost? | No |
| Able to control ignition timing? | Yes |
| Boost Compatible? | No |
| C.A.R.B. EO Number | N/A |
| C.A.R.B. Exempt? | No |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov |
| Can Support Internal Datalogging? | No |
| Compatible w/ E85 Fuel | Yes |
| Compatible w/ Returnless Fuel System? | Yes |
| Description_DEF | Fuel Injection System |
| Description_DES | 1 Bar Map Sensor with 3 Weatherpack Female Terminals |
| Description_DES | 1 Foot of 3/16″ Vacuum Hose |
| Description_DES | 3/8 ID Fuel Hose |
| Description_DES | 3/8 ID Split Braid Wire Loom |
| Description_DES | 4150 Flange Air-Only Throttle Body |
| Description_DES | 450 Liter Per Hour In-Tank Fuel Pump |
| Description_DES | 6 AN SAE Socket Hex Port Plug with O Ring |
| Description_DES | 6AN Billet Fuel Filter |
| Description_DES | 6AN Female to 90 Degree Push-Lock Fitting |
| Description_DES | 6AN Female to Straight Push-Lock Fitting |
| Description_DES | 6AN Male to O-Ring 6AN Male |
| Description_DES | 6AN to 6AN Bulkhead Fitting |
| Description_DES | 8 SAE O-Ring to 8 AN |
| Description_DES | 8 SAE O-Ring to 6AN |
| Description_DES | Billet Fuel Rail for 30351 |
| Description_DES | Billet Sensor Block for 30425 Fuel Pressure Sensor |
| Description_DES | Billet Spacer for 30425 Fuel Sensor |
| Description_DES | Coolant Temperature Sensor |
| Description_DES | Early MAP Sensor to Newer Design EFI Harness Adapter |
| Description_DES | EZ 2.0 Ford 351W Multiport EFI Kit w/ Distributor and 550 HP In-Tank Fuel Pump |
| Description_DES | EZ EFI Chrome Badge |
| Description_DES | EZ Fuel+Ignition/2.0 ECU |
| Description_DES | EZ Fuel+Ignition/2.0 Multiport Harness |
| Description_DES | EZ-EFI Fuel + Ignition/2.0 Main Harness |
| Description_DES | EZ-EFI Fuel+Ignition/2.0 Solid State Fuel Pump Harness |
| Description_DES | EZ-EFI Hand-Held Cable |
| Description_DES | FAST LS3/LS7 Type 39 Lb/Hr High Impedance Injector |
| Description_DES | Ford Windsor Open Plenum 4150 Flange Intake Manifold |
| Description_DES | Fuel Pressure Gauge |
| Description_DES | Fuel Pressure Regulator EFI |
| Description_DES | Fuel Pressure Sensor for EZ-EFI Fuel+Ignition |
| Description_DES | Fuel Pump Filter for In-Tank 450LPH Pump |
| Description_DES | Fuel Pump Pigtail for In-Tank 450LPH Pump |
| Description_DES | Fuel Rail Stand |
| Description_DES | Hose Clamp 40-60mm / 1 5/8 – 2 3/8 in |
| Description_DES | Hose Clamp for 30295 EFI Fuel Hose |
| Description_DES | Intake Air Temperature Sensor |
| Description_DES | LT1 Style Idle Air Control Valve |
| Description_DES | Nut for 6AN Bulkhead Fitting |
| Description_DES | Nylon Washer for 6AN Fitting |
| Description_DES | O2 Sensor Bung Plug |
| Description_DES | Stainless Steel Set Screw for 30248 Fuel Rail. 10-32 x 5/16 in |
| Description_DES | Suction Cup Mount for EZ-EFI Touch-Screen Hand-Held |
| Description_DES | Touchscreen Handheld for EZ 2.0 |
| Description_DES | TPS for EZ 1.0 and EZ 2.0 Throttle Bodies |
| Description_DES | Weld-In Oxygen Sensor Bung |
| Description_DES | XDi Windsor Distributor |
| Description_EXT | This EZ 2.0 Kit comes with intake, fuel rails, injectors, air-only throttle body, in-tank fuel pump kit (500 HP) |
| Description_INV | EZ 2.0 351W Multiport Kit |
| Description_MKT | FAST also offers complete bolt-on EZ-EFI 2.0 Fuel + Ignition Multi-Port Electronic Fuel Injection Kits that allow anyone to install a multi-port injection setup on Small and Big Block Chevy and Small Block Ford engines that were originally carbureted. These kits can be used on anything from mild street rods and muscle cars to 1,000 horsepower all-out race cars. EZ-EFI 2.0 Fuel + Ignition Multi-Port Electronic Fuel Injection Kits include carefully matched components, including the EZ-EFI 2.0 Fuel + Ignition , hand-held device, single plane EFI intake manifold, throttle body, Precision-Flow Fuel Injectors, fuel rails, in-tank or inline fuel pump kit, electronic fuel pressure kit, all necessary sensors, clearly labeled wiring harnesses and the distributor. |
| Description_SHO | Fuel Injec. System |
| Description_SHP | No |
| Fuel Injection Series | EZ-EFI Fuel+Ignition |
| height | 21.2 |
| Individual Cylinder Corrections? | No |
| Injection Type | Multi-Port |
| Knock Retard Compatibility? | No |
| Laptop Datalogging Support | No |
| length | 30.2 |
| Nitrous Compatible? | Yes |
| Requires Separate Personal Computer? | No |
| Title | EZ 2.0 351W Multiport w/intake, rails, throttle body, distributor and fuel pump |
| Uses Fuel Pressure Sensor? | Yes |
| weight | 59.9 |
| width | 22.6 |
Explore more from our collection.
Reviews
There are no reviews yet.